![background image](http://html.mh-extra.com/html/canon/imageformula-dr-1210c/imageformula-dr-1210c_service-manual_62930081.webp)
COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
5-1
CHAPTER 5 TROUBLESHOOTING
I. ERROR
DISPLAY
1. Operation Panel
The operation panel displays error
messages. The details are as described
below. Note that these messages may not
appear instantaneously.
For the detailed causes and counter-
measures, refer to “III / IV. OPERATING /
IMAGE TROUBLESHOOTING”.
1) Scanner recognition
This machine has two types of “Ready”
messages.
One shows that the machine power is on
and the other, that the computer recog-
nizes the machine.
No. Display
Meaning
Ready
Power on
(Before recog-
nized)
1-1
Ready
After recognized
Table 5-101
In case where the driver (including job
tools) has been installed, the “Power on”
ready message turns to the “Recognized
by computer” ready message immediately
after the machine power is turned on.
Should the “Recognized by computer”
ready message not appear, there must be
failure(s) in the USB cable connection
and/or software installation. Check and
take measures.