1-16
COPYRIGHT © 2006 CANON ELECTRONICS INC. CANON DR-1210C FIRST EDITION FEB. 2006
CHAPTER 1 GENERAL DESCRIPTION
3. Clearing Paper Jam
The display shows an error indication if
document is jammed in the feeder. Follow the
procedures described below to clear it.
Paper Jam
Figure 1-508
1) Remove the document left on the docu-
ment feed tray and in the document eject
opening.
Figure 1-509
2) Open the feeder cover and check the state
of the jammed document. If no document
is left in the feeder cover, check the back
of the feeder and the document eject
opening as well.
Figure 1-510
3) Remove the jammed document carefully
so as not to break it. If the separation pad
section catches the document, lay the
paper release lever towards the roller shaft
as shown below, then remove the docu-
ment. Otherwise, the roller unit may be
removed to clear the jam.
Figure 1-511
Note:
If the jammed document is not folded or
skewed, close the feeder cover and
press the STOP button. This auto-
matically ejects the document. Note,
however, that once the ADF sensor
detects the document, it is not ejected
even if the STOP button is pressed.
