manualshive.com logo in svg

Canon i-SENSYS MF229dw, Руководство по обслуживанию, Страница: 245 / 308

Поделиться
Скачать
Canon i-SENSYS MF229dw Скачать руководство пользователя страница 245

4

4

4-183

4-183

Disassembly/Assembly > Pickup Feed System (Simplex Model) > Removing the Pickup Unit (Simplex Model) > Procedure

Disassembly/Assembly > Pickup Feed System (Simplex Model) > Removing the Pickup Unit (Simplex Model) > Procedure

8) Turn the machine so that it is placed with its front side down.

9) Remove the 6 screws (TP) [1] and the screw (with toothed lock washer) [2].

7x

[2]

[1]

[1]

F-4-540

F-4-541

10) Remove the Pickup Unit [2] while opening the Pickup Tray [1].

[1]

[2]

CAUTION:

•  When installing the Pickup Unit [1], be sure that the Contact Spring [2] is in contact 

with the [A] part.

•  Be sure to make the contact point [3] of the grounding come in contact with the [B] 

part.

•  Be sure to install the Pickup Unit [1] while holding the Pickup Tray [4].
(This is because the tension of the spring is applied to the Pickup Tray.)

[1]

[2]

[3]

[4]

[A]

[B]

F-4-543

F-4-542

Содержание i-SENSYS MF229dw





















































































































































































































































































































Отзывы:

Нет отзывов