manualshive.com logo in svg

Canon i-SENSYS MF229dw, Руководство по обслуживанию, Страница: 197 / 308

Поделиться
Скачать
Canon i-SENSYS MF229dw Скачать руководство пользователя страница 197

4

4

4-135

4-135

Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Separation Pad (Duplex Model) > Procedure

Disassembly/Assembly > Pickup Feed System (Duplex Model) > Removing the Separation Pad (Duplex Model) > Procedure

Removing the Separation Pad (Duplex Model)

 

■

Procedure

CAUTION:

Do not touch the surface of the Separation Pad.

1) Turn the machine so that it is placed with its left side down.
2-1) Hold and open the DADF Unit + Reader Unit [1] (DADF Model).
2-2) Hold and open the SADF Unit + Reader Unit [1] (SADF Model).
2-3) Hold and open the Copyboard Unit + Reader Unit [1] (Copyboard Model).

CAUTION:

Turning the machine sideways may release the tension of the hinge of the SADF Unit [2] 
and cause the units to open suddenly.

[2]

F-4-388

F-4-387

[1]

3) Remove the Separation Pad [1].
•  2 Screws [2]
•  2 Hooks [3]

2x

[1]

[2]

[3]

F-4-389

F-4-390

Содержание i-SENSYS MF229dw





















































































































































































































































































































Отзывы:

Нет отзывов