Canon i-SENSYS MF229dw Скачать руководство пользователя страница 111

Страница: 111 / 308

4-49

Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure

2) Press the gear [1] to bend the belt [2], and remove the belt [2] from the gear [3].

CAUTION:

Grease is applied on the shaft [4] of the Contact Image Sensor, so be careful not to let
the belt [2] come in contact with the shaft.

[2]

[4]

F-4-108

[2]

[1]

[3]

F-4-109

3) Remove the Guide Cover [1].
• 1 Claw [2]

[2]

[1]

4) Free the harness [1] and the Grounding Wire [2] from the hole [A] of the Reader Unit and

the Harness Guide [B].

[2]

[1]

[B]

[A]

F-4-110

F-4-111

Содержание i-SENSYS MF229dw





















































































































































































































































































































Результаты поиска

Содержание i-SENSYS MF229dw

Отзывы:

Canon i-SENSYS MF229dw, Руководство по обслуживанию, Страница: 111 / 308

Результаты поиска

Содержание i-SENSYS MF229dw

Отзывы: