manualshive.com logo in svg

Canon i-SENSYS MF229dw, Руководство по обслуживанию, Страница: 110 / 308

Поделиться
Скачать
Canon i-SENSYS MF229dw Скачать руководство пользователя страница 110

4

4

4-48

4-48

Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure

Disassembly/Assembly > Original Exposure/Feed System (DADF Model) > Removing the Flat Bed Motor Unit (DADF Model) > Procedure

Removing the Flat Bed Motor Unit (DADF Model)

 

■

Preparation

1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2) Remove the DADF Unit + Reader Unit (Refer to page 4-27).
3) Disconnecting the DADF Unit + Reader Unit (Refer to page 4-30).
4) Remove the Copyboard Glass (DADF Model) (Refer to page 4-44).

F-4-105

 

■

Procedure

CAUTION:

•  Do not lose the 2 spacers [1] of the Contact Image Sensor Unit.
•  Do not touch the document reading part [A] of the Contact Image Sensor Unit.

[1]

[A]

F-4-106

1) Move the Contact Image Sensor Unit [1].

[1]

F-4-107

Содержание i-SENSYS MF229dw





















































































































































































































































































































Отзывы:

Нет отзывов