manualshive.com logo in svg

Canon i-SENSYS MF229dw, Руководство по обслуживанию, Страница: 139 / 308

Поделиться
Скачать
Canon i-SENSYS MF229dw Скачать руководство пользователя страница 139

4

4

4-77

4-77

Disassembly/Assembly > Original Exposure/Feed System (Copyboard Model) > Removing the Copyboard Cover + Reader Unit > Procedure

Disassembly/Assembly > Original Exposure/Feed System (Copyboard Model) > Removing the Copyboard Cover + Reader Unit > Procedure

3) Remove the Copyboard Cover + Reader Unit [1].
•  2 Claws [2]

CAUTION:

•  Be sure to install/remove the unit carefully so as not to damage the Flat Cable [3] 

and harness [4] with the [A] part.

[3]

[3]

[4]

[A]

•  Be sure to place the unit so as not to damage the Flat Cable [3] and harness [4].

[3]

[4]

F-4-192

F-4-193

2x

[1]

[2]

NOTE: How to assemble the Reader Unit

Be sure to secure the 2 claws [1] of the Hinge Arm to the 2 hooks [2] of the Reader Unit.

[2]

[1]

F-4-195

F-4-194

Содержание i-SENSYS MF229dw





















































































































































































































































































































Отзывы:

Нет отзывов