Loading Paper
4-5
Paper Ha
ndli
ng
4
7
Specify the paper size and type.
❑
Press [Menu]
➞
[OK].
❑
Press [ (-)] or [ (+)] to select <1.CASSETTE>
➞
press [OK] twice.
❑
Press [ (-)] or [ (+)] to select the appropriate paper size
➞
press [OK] twice.
❑
Press [ (-)] or [ (+)] to select the appropriate paper type
➞
press [OK].
❑
Press [Stop/Reset] to return to standby mode.
IMPORTANT
•
Do not load different size and type of paper at the same time.
•
Do not load extra paper when there is still paper left in the cassette. If you load extra paper while printing, remove
the loaded paper first. Then put it together with the extra paper and tap the edges. After that, reload it in the
cassette.
NOTE
•
Select ‘ENVELOPE’ for envelopes. For details on loading envelopes in the cassette, see “Loading Envelopes in
the Cassette,” on p. 4-5.
•
For information on how to use non-standard size paper, see “Loading Paper in the Multi-Purpose Feeder,”
on p. 4-8, or “Loading an Envelope in the Multi-Purpose Feeder,” on p. 4-9.
Loading Envelopes in the Cassette
1
Arrange the stack of envelopes on a firm, clean surface, and press down firmly on the edges to make the
folds crisp.
Press all the way around the envelopes to remove any curls and expel air from inside the envelopes. Also, press
firmly on the area that corresponds to the edges of the back flap.
2
Remove any curling from the envelopes by holding the edges diagonally and bending them gently.
