Canon F-1, Руководство по обслуживанию

Страница: 137 / 179

5
5
5-3
5-3
Adjustments > Overview > DADF
Adjustments > Overview > DADF
DADF
Item
At main parts replacement
As needed
basis
Reference
DADF (including when it is
engaged or disengaged)
Scanner unit
Original width
volume
Post-separation sensor 3
Registration sensor
Lead sensor 1
Delivery sensor
(Refer to page 4-6) (Refer to page 4-7) - -
Preparation or Creation of Test Chart
*1
1 p. 5-10
Angle Restriction Release (Opening Angle at 90 deg) 2 p. 5-10
Sensor Output Adjustment 3 1 p. 5-11
Tray Width Adjustment 4 1 p. 5-11
Tilt Adjustment 5 p. 5-12
Height Adjustment 6 p. 5-12
Right Angle Adjustment 7 p. 5-15
Registration Roller Wheel Skew Adjustment Yes p. 5-16
Stream Reading Adjustment Yes p. 5-18
Side Registration Adjustment 8 p. 5-19
Leading Edge Registration Adjustment 9 p. 5-20
Magnification Adjustment 10 p. 5-21
White Level Adjustment 11 p. 5-22
Hinge Pressure Adjustment Yes p. 5-22
Processing after Scanner Unit Replacement 1 p. 5-7
*1: [Preparation or creation of test chart] is required for [Right angle adjustment], [Registration roller wheel skew adjustment], [Side registration adjustment],
[Leading edge registration adjustment] and [Magnification adjustment].
Refer to the reader’s manual for the operation when the reader controller PCB is replaced (or EEPROM is cleared).
T-5-2