Canon F-1, Руководство по обслуживанию

Страница: 126 / 179

4
4
4-50
4-50
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Post-separation Sensor 1/Post-separation Sensor 2/Post-separation Sensor 3 > Procedure
Parts Replacing and Cleaning > Consumable parts for periodical replacement and locations for cleaning (DADF) > Cleaning the Post-separation Sensor 1/Post-separation Sensor 2/Post-separation Sensor 3 > Procedure
Cleaning the Post-separation Sensor 1/Post-separation
Sensor 2/Post-separation Sensor 3
■ Procedure
1) Open the Feeder Cover [1].
[1]
2) Remove the Inner Cover [1].
• 3 Screws [2]
x3
[1]
[2]
F-4-132
F-4-133
Cleaning the Post-separation Sensor 1
3) Clean the Post-separation Sensor 1 [1] by blowing air a couple of times through the hole [A]
of the guide with a blower [2]. (When wiping it, be sure to use wet and tightly-wrung lint-free
paper.)
[1]
[2]
[A]
Cleaning the Post-separation Sensor 2
4) Clean the Post-separation Sensor 2 [1] by blowing air a couple of times through the hole [A]
of the guide with a blower [2]. (When wiping it, be sure to use wet and tightly-wrung lint-free
paper.)
[1]
[2]
[A]
F-4-134
F-4-135