Canon F-1, Руководство по обслуживанию

Страница: 84 / 179

4
4
4-8
4-8
Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
Parts Replacing and Cleaning > Removing from the connection equipment (Reader) > Removing the DADF + Reader Unit > Procedure
3) Disconnect the Reader Communication Cable [1].
• 3 Wire Saddle [2]
• 2 Connectors [3]
x3
x2
[1]
[2]
[3]
NOTE:
Be sure to refer to the correct steps according to the following instruction since the
steps differ between the Upright Control Panel model and the Flat Control Panel model.
• For Upright Control Panel model, refer to steps 4, 5-1, and 6-1.
• For Flat Control Panel model, refer to steps 5-2, and 6-2.
4) Remove the Base Cover (Front) [1] and the Base Cover (Rear) [2] (Upright Control Panel
model only).
• 2 Screws [3]
x2
[1] [2] [3]
F-4-11
F-4-12
5-1) Remove the Upper Right Cover 2 [1] (Upright Control Panel model).
• 1 Screw [2]
[1]
[2]
5-2) Remove the Upper Right Cover 2 [1] (Flat Control Panel model).
• 1 Screw [2]
• 1 Protrusion [3]
[1]
[2]
[3]
F-4-13
F-4-14