Canon EOS C300 Mark II, Инструкция по эксплуатации

Страница: 107 / 223

107
Using Metadata
NOTES NOTES
• After you set a user memo, do not remove the SD card while you are recording. If the SD card is removed, the
user memo will not be added to the clip.
• You must set the user memo before you start recording for it to be added to the clip. You cannot change the user
memo already added to a clip using the camera but you can do so with Canon XF Utility for XF-AVC.
• When the optional GP-E1 GPS Receiver is attached to the camera and the GPS function is activated, the user
memo information will not be recorded, even if you have selected a user memo file from the SD card.
Entering Information About the Recording
You can enter scene and take information to help identify the recording
later on.
1 Open the [Scene] or [Take] submenu.
[
3
Recording/Media Setup]
>
[Metadata]
>
[Scene] or [Take].
2 Select [Set] and then press SET.
• Enter the desired text using the keyboard screen (
A
35).
• To clear the scene/take information, select [Reset] instead.
3 Select [OK] and then press SET.
[
3
Recording/Media Setup]
[
Metadata]
[Scene] ….. [(NONE)]
[Take] ….. [(NONE)]