manualshive.com logo in svg

Canon Color imageRUNNER LBP5280, Руководство по обслуживанию, Страница: 78 / 284

Поделиться
Скачать
Canon Color imageRUNNER LBP5280 Скачать руководство пользователя страница 78

2

2

2-59

2-59

Technical Reference > MEAP > Enhanced System Application Management > Procedure Changing Login Services

Technical Reference > MEAP > Enhanced System Application Management > Procedure Changing Login Services

Enhanced System Application Management

 

■

Outline

[ Enhanced System Application Management ] mainly manages the login services for logging 
in to devices.
•  Installing and uninstalling Enhanced System Application Management (login services, etc.)
•  Switching login services (switching the method to log in to devices)
•  Checking installation status of other System Applications

F-2-122

 

■

About Login Service

The login service is started up to authenticate the user when MEAP-enabled iR device is 
booted up. Login service changes and install/ uninstall are carried out from the 'System 
Management' page. 
The pre-installed login application is Default Authentication, and the default setting is [ Start ].

 

■

Default Authentication overview

Default Authentication is a pre-installed login application that runs by default. It provides 
authentication functions to allow minimum operation of the Controller System, even when no 
other login application is running.

 

■

Other Log in service

There are login services besides the foregoing Default Authentication, such as card 
authentication. For details, refer to the manuals for those login services.

 

■

Procedure Changing Login Services

If 2 or more login services are installed, you can use the following procedure to switch among 
them.
1) Access SMS. From the [ System Management ] menu, select [ Enhanced System 

Application Management ].

F-2-123

Содержание Color imageRUNNER LBP5280





























































































































































































































































































Отзывы:

Нет отзывов