manualshive.com logo in svg

Canon Color imageRUNNER LBP5280, Руководство по обслуживанию, Страница: 229 / 284

Поделиться
Скачать
Canon Color imageRUNNER LBP5280 Скачать руководство пользователя страница 229

5

5

5-32

5-32

Troubleshooting > Version Upgrade > Updater > Preparation

Troubleshooting > Version Upgrade > Updater > Preparation

3. The Communication Test is carried out.

Obtain the download file information for communication test from the distribution server
(to execute the communication test to the distribution server).
Using the download file information for communication test, the contents for test are 
downloaded from the file server (for the communication test to the file server).

4. Upon the communication test completed, the communication test result screen is shown.

Press [OK] button to exit this operation.

F-5-37

F-5-38

 

●

Enabling UGW Link

When installing the firmware in the method of “UGW-linked Download and Update” or “UGW-
linked Download”, the following should be set before actually using UGW link.

Service Technician

Setting of Device 

Service Mode

SERVICE MODE >FUNCTION GR. >MEAP 

>CDS-UGW

(On -> Off)

Setting of UGW 

WebPortal

In [Customer Management] screen, set [Do not 

distribute firmware] to [Distribute firmware].

Sales Company's HQ Setting of Authorities on 

UGW WebPortal

See "Analysis>Firmware Distribution 

Information" to grant the appropriate authorities 

to each account.

NOTE:

•  See “imageWARE Remote Operator’s Manual / e-Maintenance Business Operation 

Manual“ for how to operate UGW WebPortal.

•  [Distribute Firmware] should be set on [Customer Management] screen for staff in charge 

of setting for [Enter customer information] or [Command for firmware distribution] in order 

to allow them to select the desired device on [Firmware Distribution Information] screen.

•  If [Distribute Firmware] is not shown on [Customer Management] screen of UGW 

WebPortal, appropriate authorities may not be set to each account in Firmware 

Distribution Information. Contact the Sales Company HQ concerned for confirmation.

Содержание Color imageRUNNER LBP5280





























































































































































































































































































Отзывы:

Нет отзывов