manualshive.com logo in svg

Canon Color imageRUNNER LBP5280, Руководство по обслуживанию, Страница: 222 / 284

Поделиться
Скачать
Canon Color imageRUNNER LBP5280 Скачать руководство пользователя страница 222

5

5

5-25

5-25

Troubleshooting > Version Upgrade > Updater > Overview

Troubleshooting > Version Upgrade > Updater > Overview

Updater

 

■

Overview

 

●

Outline

Updater provides functions that enable network communication with Content Delivery System 
V1.0 (hereinafter CDS) to install firmware, MEAP applications and system options.

•  Firmware Installation

Updater function enables users to distribute firmware through CDS via Internet. Particularly 
on e-Maintenance/UGW (called NETEYE in Japan)-enabled devices, firmware can be 
updated remotely, which effectively slashes costs incurred in field services.

•  MEAP Application/System Option Installation

By linking devices to CDS and License Management System (providing the function to 
manage licenses; hereinafter LMS), applications can be installed in devices via Updater, 
regardless of those not embedded (MEAP application) or embedded (system options) in 
devices.

Installing Firmware

With link to Updater, service technicians provide firmware install services in the following 3 
methods.

Distribution Method

Download 

Commanded 

by:

Update

Timing

Downloadable Firmware Versions

Previous 

Ver

Current 

Ver

Newer

 Ver

a. UGW-linked Download / Update

(Full-remote update)

UGW

Auto

No

Yes

Yes*1

b. UGW-linked Download

(Remote Distribution / Update)

UGW

Manual

Yes

Yes

Yes

c. Update via SST

SST

-

Yes

Yes

Yes

*1:You can select the version allowed Remote Update.

T-5-5

a. UGW-linked Download and Update (Full-Remote Update)

If the device is linked to UGW and the distribution schedule and update setting are 
registered on UGW in advance, full remote firmware update is available. Upon downloaded 
from CDS, the firmware is updated on the device.

UGW

1) Set up customers,

device types, distribution

schedule and the

command for download

3) Give a firmware distribution

command to e-RDS.

Firmware Upload

4) Download

firmware

5) Writing process is

automatically started upon

download completed.

2) Notify distribution

information to CDS.

Canon Inc.

CDS

Firmware

UGW Operator

Sales Company

/ Partner

LBP5280

e-RDS

Updater

b. UGW-linked Download (Remote Distribution / Update)

If the device is linked to UGW and the distribution schedule is registered on UGW in 
advance, firmware can be distributed to the device before a service technician actually 
visits the customer site. This allows the service technician to update the firmware manually 
immediately after completing device inspection.

LBP5280

UGW

1) Set up customers,

device types, distribution

schedule and the

command for download

3) Give a firmware distribution

command to e-RDS.

Firmware Upload

4) Download

firmware

5) Writing process is started by

manually executing Updater.

2) Notify distribution

information to CDS.

Canon Inc.

CDS

Firmware

UGW Operator

Sales Company

/ Partner

e-RDS

Updater

Service

Technician

F-5-27

F-5-28

Содержание Color imageRUNNER LBP5280





























































































































































































































































































Отзывы:

Нет отзывов