manualshive.com logo in svg

Canon Color imageRUNNER LBP5280, Руководство по обслуживанию, Страница: 269 / 284

Поделиться
Скачать
Canon Color imageRUNNER LBP5280 Скачать руководство пользователя страница 269

5

5

5-72

5-72

Troubleshooting > Debug log > Collecting Sublog > Collecting log

Troubleshooting > Debug log > Collecting Sublog > Collecting log

7) Enter the user name [guest] and password [welcome.].

C:╲Users╲1234>ftp 172.16.1.170
Connected to 172.16.1.170.
220 DRY FTP server ready.
User (172.16.1.170:(none)>:guest
331 Password required for guest.
Password：

Note:

Do not forget to enter the period at the end of password [welcome.].

Also note that no text appears when the password is typed in.

8) Receive the text file [/BOOTDEV/BOOT/SUBLOG.BIN] with the started FTP.
•  Change bin -> Binary mode (do not forget to prevent the log from becoming garbled). 
•  cd /BOOTDEV/BOOT
•  get SUBLOG.BIN

Note:

To change the name of Sublog, enter [get SUBLOG.BIN Any_name].

F-5-82

C:╲Users╲1234>ftp 172.16.1.170
Connected to 172.16.1.170.
220 DRY FTP server ready.
User (172.16.1.170:(none)>:guest
331 Password required for guest.
Password：

230 User logged in.
ftp> bin
200 Type set to I.
ftp> cd /BOOTDEV/BOOT
250 CWD command successful.
ftp> get SUBLOG.BIN

9) When received by the PC side, SUBLOG.BIN has been received.

200 Type set to I.
ftp> cd /BOOTDEV/BOOT
250 CWD command successful.
ftp> get SUBLOG.BIN
200 PORT command successful
150 Opening binary mode data connection
226 Transfer complete.
ftp: 2509954 bytes received in 0.75Seconds 3351.07Kbytes/sec.
ftp>

10) Input the [bye] command and end the FTP client function of the PC.

F-5-83

F-5-84

Содержание Color imageRUNNER LBP5280





























































































































































































































































































Отзывы:

Нет отзывов