Canon CLC 1120, Руководство по обслуживанию

Страница: 815 / 901

CHAPTER 13 TROUBLESHOOTING
13-288
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
INSTALL COPIER>FUNCTION
Used at time of installation.
Level 3
SPLY-Y
SPLY-M
SPLY-C
SPLY-K
STIR-Y
STIR-M
STIR-C
STIR-K
STIR-4
INIT-Y
INIT-M
INIT-C
INIT-K
INIT-4
RECV-Y
RECV-M
RECV-C
RECV-K
Remarks Description
Use it to rotate the developing cylinder to supply a
specific color developer to the developing assembly.
Using the Item
1) Select an item (to highlight), and press the OK
key.
2) To stop, press the Stop key.
Use it to stir the developer inside a specific color
developing assembly.
Using the Item
1) Select an item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 2
min.
Use it to stir the developer in the four developing
assemblies in sequence.
1) Select the item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 9
min.
Use it to read the initial value of a specific toner
concentration signal SGNL, REF.
·
The screen (COPIER>ADJUST>DENS) will
show the reading. Be sure to record it on the
service label.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 2
min.
Use it to read the initial value of the four color toner
concentration signals SGNL, REF in sequence.
·
The screen (COPIER>ADJUST>DENS) will
show the readings. Be sure to record them on the
service label.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 9
min.
Use it to rotate the developing cylinder, thereby
drawing the developer from a specific color
developing assembly.
Using the Item
1) Select an item (to highlight), and press the OK
key.
2) To stop, press the stop key.
Note:
You will use this mode during installation.