Canon CLC 1120, Руководство по обслуживанию

Страница: 487 / 901

COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
11-33
CHAPTER 11 INSTALLATION
VI. INSTALLING THE COPY DATA CONTROLLER-A1
Note:
The Copy Data Controller-A1 is not available in certain sales areas.
1. Setting the Board
1) Remove the two screws [2], and detach the top cover [1].
Figure 11-601
[2]
[1]
[2]
Position
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
Description
Use it for normal operation.
Use it for IPC communication.
Use for serial communication.
Use it if a central control device is
used.
Use it for remote control in normal
operation or with a commercially
available modem.
Use it for RAM initialization.
Use it for normal operation.
Use it for factory adjustment.
Use it for normal operation.
Use it for control of inch-configured
papers (11x17, LTR, LGL, STMT).
Use it for control of AB-configured
papers (A3, A4, B4, B5).
Use it for service mode.
Use it for normal operation.
Use it for group control.
Use it if group control is not selected.
Not used.
Table 11-601
*1: If the Control Card Unit-V or remote control by the Copy Data Controller-A1 only is used, set bit
4 of the DIP switch (SW5-4) to OFF; i.e., if group control functions are not used except ID input,
control by paper size, control by toner color, control by copy mode, and control by paper type.
SW1
SW5
Bit
1~3
4
5
6
1
2
3
4
5,6
Remarks
CLC1120/1130/1150
Requires the Interface Board-B1.
If a commercially available modem
is used, requires the Interface Board-
B1.
If a paper other than the left must be
selected, use service mode. (See 10)
of 3. “Checking the Operations.”)