Canon BJC-S530D, Быстрый старт

Страница: 84 / 96

80
Appendix
Power Supply
•
Always push the plug completely into the power outlet. A loose or poorly
connected plug could cause a fire or electric shock.
•
Never use the printer if the power cord is bundled or knotted. To help prevent
the hazards of fire or electric shock, make sure the power cord is straight.
•
Always grasp the plug when you unplug the power cord. Pulling on the power
cord could damage the cord and cause a fire or electric shock.
Never attempt to plug the power cord into a power outlet when
your hands are wet. To avoid electric shock, make sure that your
hands are dry.
Never cut, modify, stretch, bend, or twist the power cord, or never
place heavy objects on the power cord. A power leak from a
damaged power cord could cause a fire or electric shock.
Never plug the printer power cord into a power outlet (power
board, double adapter, etc.) that is shared by other devices or
office equipment. To help prevent the hazards of fire or electric
shock, avoid overloading power points.
If you detect smoke, unusual odors, or strange noises around the
printer, immediately press the POWER button to turn off the
printer and disconnect the power plug. To reduce the risk of fire
or electric shock, never use the printer under these conditions.
Call the Canon Customer Care Center.
Never use an extension cord. To help avoid a fire or electric
shock, always plug the power cord directly into the power outlet.
Never use a power supply voltage other than that supplied in the
country where you purchased the printer. Using incorrect voltage
could cause a fire or electric shock. The correct power supply
voltage for this printer is AC 120V, 60 Hz.
S530D QSG.book Page 80 Tuesday, May 7, 2002 4:14 PM