Canon BJC-S530D, Быстрый старт

Страница: 38 / 96

34
Printing Without a Computer
Maintenance Procedures for Direct Printing
Printing a Nozzle Check Pattern
You can print a nozzle check pattern by pressing the RESUME/CANCEL button of
the printer.
1.
Make sure the printer is on.
2.
Load letter size paper.
3.
Keep the RESUME/CANCEL button pressed down, and
release it when the power lamp blinks twice.
To print a nozzle check pattern:
1.
Make sure the printer is on.
2.
Load letter size paper.
3.
Press the Maintenance button. The
icon appears in Required Sheets.
4.
Press the (right) button once. The
icon appears.
5.
Press the Print button. Nozzle check pattern is
printed. When printing ends, the
icon appears.
6.
Press the Maintenance button to exit.
7.
Compare the nozzle check patterns.
•
If the lines in the first pattern are broken,
the print head must be cleaned. See
“Cleaning the Print Head” on page 35.
•
If the vertical lines in the second pattern
stand out, the print head position must
be aligned. See “Aligning the Print
Head” on page 43.
RESUME/CANCEL button
S530D QSG.book Page 34 Tuesday, May 7, 2002 4:14 PM