Canon BJC-S530D, Быстрый старт

Страница: 69 / 96

Troubleshooting
65
Troubleshooting Printer Hardware
Problem Possible Cause Try This
Paper feeds
incorrectly or
paper jam Paper jammed during
automatic feed Gently pull the jammed paper out of the sheet feeder slot or the
paper output slot, whichever is easier. If the paper will not pull
out of the printer easily, do not force it.
If the paper tears and some of it is left in the printer, turn the
printer off, open the front cover, and remove the pieces of paper.
Reload paper into the automatic sheet feeder then press RESUME/
CANCEL button (next to the POWER button) on the printer.
If you turn the printer off, your print job data will be lost. Print the
job again.
Paper loaded
incorrectly or exceeds
the load limit Verify that the stack of paper has been loaded correctly, not
exceeding the maximum load limit.
Paper path obstructed Turn the printer off and unplug the power cord. Then check and
see if there are any obstructions blocking the paper path. If so,
remove the obstructions and try printing again.
S530D QSG.book Page 65 Tuesday, May 7, 2002 4:14 PM