background image

Menu Settings

124

Network settings lock

> [Network Settings] >

 [Network settings lock]

 

You can lock/unlock the network settings so that they cannot be changed.

Network password setting

> [Network settings] >

 [Network password setting]

 

You can set whether or not a password is required in order to change the projector 
network settings.

Register network password

> [Network settings] >

 [Register network password]

 

Use the [ ] / [ ] / [ ] / [ ] buttons or number buttons on the remote control to enter 
the projector network password.

Option

Function

Unlock

Cancels the lock and allows other network settings to be changed. The 
password must be entered in order to cancel the lock. Use the [ ] / [ ] / 
[ ] / [ ] buttons or number buttons on the remote control to enter the 
four-digit network password.

Lock

Lock the settings.

Forcibly canceling the network lock

Press these buttons in the following order to cancel the lock: [ ] [OK] [ ] [OK] [ ] [OK]. 
This operation resets the network password to [ ] [ ] [ ] [ ] ([1] [1] [1] [1]).

Setting [Network password setting] to [Off] leaves network settings unlocked.

Option

Function

Off

A network password is not used.

On

A network password is used.

Содержание 4K500ST






























































































































































































Отзывы: