Menu Settings
138
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to “Network Setting” (
* When the interval is set to 0 seconds, repeated attempts to send mail are made
(as set in [Mail resend times]) without pausing between attempts.
Item
Explanation
Factory default setting
To:
Enter the recipient address for error
mails in 1-byte alphanumeric characters
and symbols (1 - 63 characters).
MailUserAccount
Cc:
Enter the CC address for error mails in
1-byte alphanumeric characters and
symbols (1 - 63 characters).
<Blank>
From:
Enter the sender address for error mails
in 1-byte alphanumeric characters and
symbols (1 - 63 characters).
SMTP server IP address Enter the SMTP server IP address in 1-
byte numbers.
0.0.0.0
SMTP server port
number
Enter the SMTP server port number in 1-
byte numbers (1 - 65535).
25
SNTP server IP address
Enter the SNTP server IP address in 1-
byte numbers.
0.0.0.0
Time zone
Select the time zone where the
projector is used.
(GMT) Dublin, Lisbon,
London
Mail resend interval*
Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 - 59 seconds using
1-byte numbers.
10
Mail resend times
Enter the number of times to resend
mail when an error occurred within the
range of 0 - 255 using 1-byte numbers.
3
Error report
Select whether to turn the error mail
sending function on or off.
OFF
