Installation Procedure
42
Assembly and Installation
■
Installation to flat and level Ceiling
Preparation: Separate the Joint
fitting from the Ceiling-mount
bracket temporarily
Remove four M5 screws to separate Joint
fitting from the Ceiling-mount bracket.
1
Make a hole in the ceiling
•
Use the template sheet (B) to make
holes in the ceiling for securing the
Ceiling-mount bracket.
•
Make holes to thread cables
through.
2
Secure the Ceiling-mount
bracket to the ceiling
Use four M13 screws, to secure the
Ceiling-mount bracket to the ceiling
with the arrow facing toward the
screen.
•
Before securing the Ceiling-
mount bracket, be sure to remove
the template sheet (B).
•
The M13 screws are not included
in the supplied parts. Prepare the
M13 screws suitable for the
ceiling structure.
•
Always use the included template sheet (B) to determine where to
make holes.
•
The template sheet (B) is labeled with the direction to the screen, as
well as the optical axis (center of the lens).
Direction to the
screen
Direction to the
screen
