background image

163

Maintenance

Ot

her
 In

fo

rm
at

ion

Ma
in

te

na

nc

e

6

Align the filter cover tab with the 
groove and close the filter cover.

Replacing the Lamp

When the usage time of the lamp exceeds a certain amount of time, the following 
message (two types) is displayed for 10 seconds every time the projector is turned 
on.

2,700 hours to less than 3,000 hours

Prepare a new lamp when this screen is displayed.

Only the [ ], [ ], 

OK

POWER

EXIT

FOCUS

ZOOM

 and 

SHIFT

 buttons are 

available while this screen is displayed.

When you press the 

POWER

 button, “Push POWER button again to turn off 

power.” message appears.

After this screen has been displayed for 10 seconds and disappeared, all buttons 
become operable.

This message will not be displayed again if you select [No] in response to the 
message “Do you want to display this message again?”.  

• Handle the air filter carefully. If damaged, the air filter will not work properly.
• We recommend cleaning or replacing the air filter (part no: RS-FL03) when you replace 

the lamp.

• Contact the Canon Customer Support Center for further information.
• Replacement air filter part number: RS-FL03
• This can also be purchased from the Canon website.

Содержание 4K500ST






























































































































































































Отзывы: