manualshive.com logo in svg

Canon 1000S, Руководство по обслуживанию, Страница: 22 / 840

Поделиться
Скачать
Canon 1000S Скачать руководство пользователя страница 22

1.  GENERAL DESCRIPTION

1-10

COPYRIGHT © 2001 CANON INC.               CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)

C. Points to Note When

Handling the Laser Unit

When servicing the optical unit of the product,

take adequate care not to interrupt the laser path
with a tool having a high reflectance.

As a rule, remove the watch, rings, or the like

before work; such items tend to reflect the beam
and damage the eyes.

Remain alert when servicing inside the covers

on which the label is attached.

The machine is equipped with a shutter which

blocks out the laser beam when the front left door
is opened; therefore, when images are checked
with the front left door open, the shutter needs to
be held open using a door switch actuator. Keep
these in mind when such work is necessary.

Figure 1-303

DANGER

- Laser radiation when open.

AVOID DIRECT EYE EXPOSURE.

- 

FS6-8029

CAUTION

- 

LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.

FS6-8030

ATTENTION

- 

RAYONNEMENT LASER EN CAS D'OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU.

VORSICHT

- 

LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.

PRECAUCION

- 

RADIACION LASER CUANDO SE ABRE. EVITAR EXPONERSE AL RAYO.

ATTENZION

- 

RADIAZIONE LASER IN CASO DI APERTURA. EVITARE L'ESPOSIZIONE AL FASCIO.

VARO!

- 

AVATTAESSA OLET ALTTINA LASERSÅTEILYLLE. ÅLÅKATSO SÅTEESEEN.

VARNING!

- 

LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD. BETRAKTA EJ STRÅLEN.

ADVARSEL!

- 

LASER STRÅLING, NÅR DENNE ER ÅBEN. UNDGÅ BESTRÅLING.

ADVARSEL

- 

LASERSTRÅLING NÅR DEKSEL ÅPNES. UNNGÅ EKSPONERING FOR STRÅLEN.

Содержание 1000S









































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов