CANGAROO LA SCALA, Инструкция по эксплуатации

Страница: 13 / 58

13
Note: Restart the electronics if the mechanism becomes unstable. Turn off the power button, remove the batteries, and
then insert them following the steps above.
IMPORTANT! The batteries are exhausted if the movement and volume of the music weaken. Replace them with new
ones and dispose of used batteries in the designated area.
FUNCTION OF THE VIBRATION BOX – FIGURE 32
Remove the seat cover and find the cap of battery compartment (Figure 32). Insert 1 1.5 V type AA alkaline battery (not
included), observing the polarity marked on the bottom of the compartment. Put the battery cover back on and tighten the screws
with a screwdriver. Do not overtighten. To remove the batteries, repeat the above-described actions.
WARNING!
•
Non-rechargeable batteries are not to be recharged.
•
Only an adult should handle the batteries. Keep children away from batteries. NEVER allow children to play with or charge
the battery.
•
The rechargeable batteries should be removed from the product before charging.
•
Different types of batteries are not to be mixed.
•
New and used batteries are not to be mixed.
•
Batteries are to be inserted with the correct polarity.
•
If you are not going to use the product for a long time, remove the batteries.
•
Remove used batteries from the product and dispose of them in the designated areas, not in household waste containers.
•
Do not dispose of batteries in a fire as there is a risk of explosion or leakage.
•
Use only the type of battery recommended by the manufacturer.
•
Never change or modify the electric current. The power terminals must not be short-circuited.
•
Always use the adapter and rechargeble battery provided along with this product. NEVER USE battery or charger of
another brand or another product. The input voltage of the adapter is 100-240V/50/60Hz 0.3A. The output voltage is 5-
6V/0.8A.
•
Do not place the battery or adapter for another product. This may result in overheating, fire or explosion.
•
Keep the adapter away from children.
•
Before you start charging the product you must check whether the adapter, battery and cables are in good working order.
If there is damage on any of these parts, you must stop using them, until the damage is removed.
•
Do not let the battery discharge entirely. You must recharge it after each use or once a month if you are not going to use
it regularly.
Protect the environment by not disposing of this product in household waste containers
(2002/96 / EU). Check the recommendations of local authorities.
IMPORTANT!
The diagrams and figures in this instruction are illustrative and indicative only.
Follow exactly the instructions and sequence for assembling and operating with the product.
Check the securing of the fixation after each operation.
Fixing a certain position in most cases is accompanied by a clicking sound.
COMPONENTS - ILLUSTRATION А: After unpacking, make sure that all elements of illustration A are available.
1. Main control panel (musical and vibration box mechanism; compartment for installing the seat support frame; quick release
button; battery compartment; power socket); 2. Bottom frame tube (left and right); 3. Support frame; 4. Seat support group; 5.
Front seat frame tube; 6. Back seat frame tube along with toybar holder; 7. Toybar stand (3 toys); 8. Power adapter and remote
control 9. Seat body cover (cusion, pillow, seat belt, cross and shoulders belt).
ASSEMBLY OF THE STRUCTURE
1. Assembling of the base frame support tube (Illustration B)
- Insert the side tubes into the holes of the main body, making sure
that the orientation of the tubes is the same as that shown in Figure 1 (A to A1 and B to B1). The two ends of the side tubes should
be joined and securely fastened until you hear a clicking sound. Then, place the two assembled main frame tubes to the main
body with the locking pin should be fixed to the two buckles as shown in Figure 2. The locking pin is well fixed when you hear a
clicking sound. After assembling the support frame, it should be checked that the release button is correctly installed. The position
of the button shown in Figure 3 is incorrect and the locking pin cannot be activated. The position of the button shown in Figure 4
is correct and the locking pin can be activated normally.
2. Assembling of the seat front and rear tube (Illustration C) - Assemble the front of the seat console tube as shown in Figure 5
(with D1 to D) until you hear a clicking sound. Assemble the other side of the tube in the same way. Follow the same steps to
assemble the rear of the seat console tube with E1 to E.
3. Assembling the seat pad (Illustration D) - Install the seat by following the steps in Figures 6 and 7. Pull the upholstery zipper all
the way as shown in Figure 8, Image B. Image A in Figure 8 illustrates the incorrect fastening on the zipper, where the seat cannot
be used. Attach the retaining buckle to the seat upholstery as shown in Figures 9 and 10.
4. Installing the whole body together with the seat (Illustration E) - Place the whole body together with the installed seat in the
designated compartment of the control panel as shown in Figures 11 and 12. Push down until it clicks.
ASSEMBLY INSTRUCTIONS