Canbuilt OPT-5405, Руководство пользователя

Страница: 4 / 22

Check that the mast is correctly positioned. The aimer head
should be parallel to the base (fig. 4). Tighten the mast bolt
with 10 mm allen wrench.
fig. 4
Fig. 3
PUSH
fig. 1
CORRECT
INCORRECT
fig. 2
fig. 5
Bolt the mast to the base aligning the mast as shown in fig. 1.
STEP 2
Assembling the Aimer
Install optical aimer head on mast as shown in fig.2 by
pressing trigger lock (fig. 3) and sliding it down the mast
.
STEP 3
Install the lateral alignment visor (fig. 5). The narrow slot in
the visor should face the rear of the aimer (the wide slot faces
the front).
Page 3 - Assembling the Aimer
ASSEMBLY IS COMPLETE
The Panther is factory calibrated for accuracy, to verify calibration of aimer, see section on aimer calibration.
STEP 5
STEP 4
Canbuilt Mfg.
Perfect Night Vision.....