3
PW1605
www.chpower.com
Important Safety Instructions (Continued)
Risk of injection or sever injury
• High pressure. Keep clear of nozzle. Do not discharge
streams at persons or animals.
• Never put hand or fingers over spray tip while operating
the unit.
• Never try to stop or deflect leaks with any body part.
• Always engage the trigger safety latch in the safe
position when spraying is stopped even if only for a few
moments.
• Point gun in safe direction. Unit will start spraying when
trigger is squeezed if
“ON / OFF”
switch is in
“ON”
position.
• Discharge pressure – When
“ON / OFF”
switch is in
“OFF”
position, pressure may still exist in unit. To
discharge pressure, point gun is safe direction and
squeeze trigger.
Risk of explosion
• Do not spray flammable liquids.
• Never use in areas containing combustible
dust, liquids, or vapors.
• High pressure - Gun kicks back – Hold gun with both
hands.
• Keep hose away from sharp objects. Bursting hoses
may cause injury. Examine hose regularly and replace if
damaged. Do not attempt to mend a damaged hose.
• Use only detergents specifically formulated for pressure
washers. Always follow detergent manufacturer’s
label recommendations for proper use of detergents.
Always protect eyes, skin, and respiratory system from
detergent.
• For either indoor or outdoor use. Store indoors and
where temperature stays above freezing.
• Unplug unit when not in use.
• Pressure washer is not meant to pump hot water. Do not
connect to hot water supply.
• Never leave the unit unattended while it is plugged in.
• Always turn water supply
“ON”
before turning pressure
washer
“ON.”
Running pump dry causes damage.
Servicing of a Double - Insulated Appliance
In a double-insulated product, two systems of insulation
are provided instead of grounding. No grounding means
are provided for a double-insulated product, nor should
grounding means be added to the product. Servicing
a double-insulated product requires extreme care and
knowledge of the system, and should be done only by
qualified service personnel. Replacement parts for a double-
insulated product must be identical to the original parts. A
double-insulated product is marked with the words “Double
Insulation” or “Double Insulated.” Product may also be
marked with symbol shown below.
Do not use pressure that exceeds the
operating pressure of any of the parts
(hoses, fittings, etc.) in the pressurized system. Ensure
all equipment and accessories are rated to withstand the
maximum working pressure of the unit.
Explosion hazard
•
NEVER
spray flammable liquids or use pressure
washer in areas containing combustible dust,
liquids or vapors.
• Never operate this machine in a closed building or in or
near an explosive environment.
Do not spray electrical apparatus and
wiring.
• Never disconnect the high pressure discharge hose
from the machine while the system is pressurized. To
depressurize machine, turn power and water supply off,
then press gun trigger 2-3 times.
• Never permanently engage the trigger mechanism on
the gun.
• Never operate the machine without all components
properly connected to the machine (handle, gun/wand
assembly, nozzle, etc.).
