Electro-pneumatic Regulator ER100
Instruction Manual
rev. 2.0
page 9 / 38
•
Correct pressure control is not possible if the exhaust port is plugged.
Always keep this port in contact with the atmosphere.
•
Tighten pipes with the appropriate torque force.
・
Pipes must be connected with the appropriate torque force to prevent
air leakages and screw damage.
・
First tighten the fitting by hand to prevent damage to the threads, then
use a tool.
R
Recommended tightening torque
Port screw
Tightening torque
N
⋅
m
G1/4
6 to 8
•
When supplying compressed air after connecting pipes, check that high
pressure is not supplied instantly.
•
Before supplying compressed air after connecting pipes, check that that
there are no air leaks at any pipe connections.
・
If necessary, apply leakage detection fluid onto pipe connections, and
check for air leaks.
2.1. Option
Bracket
Installation
Use the mounting screws which come with the bracket, to fix on the bottom face of the main body.
* For the option bracket, refer to Section 6.3 “Optional individual code”.
Cross headed pan
machine screw
with spring retainer M3×8
(4 screws/attached)
B1-type can be installed in both directions.
B1 type bracket
(Attached option: -B1)
B2 type bracket
(Attached option: -B2)
!
CAUTION
:
