Electro-pneumatic Regulator ER100
Instruction Manual
rev. 2.0
page 15 / 38
2.3.
Connecting the D-SUB
•
Insert the D-sub connector to the socket securely.
•
The D-sub connector has a mechanism for turning 90
°
. When
connecting the D-sub connector, insert it at the top or side position
while holding it securely in the hand.
•
Lock the D-sub connector so that it does not come off.
To unlock, hold the fixing base with a wrench or similar while
unscrewing with a screwdriver.
<Connector pin array>(Product body side)
Refer to Section 2.4 “Connecting” for the wiring method.
No pin is provided for the analog input type at positions marked
!
CAUTION
:
Wrench
Screwdriver
Insert the connector
while holding it securely
in the hand.
