Camozzi ER100 Series, Инструкция по эксплуатации

Страница: 28 / 42

Electro-pneumatic Regulator ER100 Instruction Manual
rev. 2.0
page 28 / 38
4.4.4.
Switch Output Setting
At function “F4”, press and hold the [SET] key at least for two seconds.
The “F4 setting mode” starts.
If the switch output is not activated
※
Factory setting
After the data is inserted, the setting mode is canceled to return
to screen F4.
SET
For two seconds or longer
SET
For two seconds or longer
In case of operation in switch output mode 1
After the data
is inserted,
the setting
mode is
canceled to
return to
Enter the target value.
key: Shift the cursor.
key: Increase the value.
SET
2 sec. or longer
2 sec. or
longer
SET
Enter the target value.
key: Shift the cursor.
key: Increase the value.
2 sec. or
longer
In case of operation in switch output mode 2
After the data
is inserted,
the setting
mode is
canceled to
return to
Enter the target value.
key: Shift the cursor.
key: Increase the value.
SET
2 sec. or longer
2 sec. or
longer
SET
Enter the target value.
key: Shift the cursor.
key: Increase the value.
2 sec. or
longer
SET
The switch output setting mode is
canceled to return to screen F4.
SET