21
Alignment Standards
of Optical Path
During common use, some deviation may appear with the optical path, resulting in no laser or light path.
If so, then please refer to the following method to adjust the optical path:
Step 1: First to ensure laser beam from laser tube to the center of the first mirror (#1).
Step 2: Add a piece of tape onto the fixture of the mirror in order to mark where the beam is pulsing, press
pulse and adjust the mirror accordingly to the center of the beam (with special attention: In order to pre-
vent the laser radiation wounding, with a piece of cardboard first to test the approximate location of the
spot, and then adjust).
