14
Z/U Key
The Z/U key can be pressed when the system is in idle or when the work is finished. On pressing this key,
it will show some entries in the following interface:
Push the “Y+/-” keys to move the green block to select an item, and then push the “Enter” key to display
the sub menu.
Z move:
When it is highlighted on “Z Move” item, “X+/-” keys can be used to move the z axes.
U move:
When the green block is on “U Move” item, “X+/-” keys can be used to move the u axes.
Axis reset+
When the green block is on this item, push the “Enter” key to show as below:
Push the “Y+/-“ Keys to move the cursor to one of the entry, then push “Enter” key to restart the selected
axis, the screen will show some information when resetting.
