10
The Control Panel
Introduction to the Keys
Reset:
Resets the whole system;
Origin:
Sets the relative origin point;
Pulse:
Pulses the laser
Frame:
To track by the current file’s frame;
File:
The management of the memory and U disc files;
Speed:
Sets the speed of the current running layer, or set the direction keys’ move speed;
Max. Power:
Set the max laser power of the current running layer, or set the power of “Pulse” Key;
Min. Power:
Set the min laser power of the current running layer
Start/Pause:
To start or pause the work;
Left & Right Arrow:
Moves the X axes or the left/right cursor;
Up & Down Arrow:
Moves the Y axes or the up/down cursor;
Z/U Buttton:
The Z/U key can be pressed when the system is idle or the work is finished. On pressing this
key, it will show some entries in the interface, each entry includes some functions, Z axes movement, U
axes movements, home axes, etc.;
Esc:
To stop work, or to exit from menu;
Enter:
Validate the change;
