31
Use a dehumidifier:
Humidity can cause the metal parts of the laser machine to rust. All metal is expected to rust. One unex-
pected metal surface is the laser mirrors. It is best to try to control the humidity level in the laser work area.
Clean the mirrors and check for this oxidation as a possible problem. Replace mirrors that do not meet your
expectation of performance.
Make a maintenance schedule:
The easiest way to follow a cleaning schedule is to buy a calendar and write on the dates that you want
to do the maintenance. Some maintenance is needed on a regular basis while other cleaning could be an
immediate requirement after a disaster. Just know that avoiding the maintenance of your laser could result
such that the laser doesn’t work right ...or not work at all.
No. Phenomena of Malfunction
Analysis method
Solution
1
Started the machine but no
movement
Check power supply of
machine connects well or not
Mainboard Parameters are off
Make sure power supply is
well connected/ if it works
Correct the parameters
according to software
operating manual
2
Working with a nonstop
laser
Mainboard Parameters are off
Correct the parameters
according to software
operating manual
3
Desultory light when work-
ing
Check if water is circulating
Voltage may not be stable
Clean Water tank, pump and
pipe
Add Regulator for the laser
machine
4
Self-test abnormal when
starting
Mainboard Parameters are off
Correct the X and Y axis
direction ,limit position
parameters according to
software operating manual
5
After output data, machine
has no action
Check whether the data port choice is
correct.
Check whether turn on the Machine
Check whether connected
ground wire for the machine
Check whether installed the
USB driver
Choose correct port
Turn the machine on
Connect Ground Wire
Install USB Driver
6
No laser when working
Check whether optical path is Bias
Check whether the cooling water is
running
Adjust the optical path
Ensure the water is running
7
The Laser Equipment is not
Detected
The Computer or the USB has a commu-
nication problem
Change the Computer or the
USB Cable
