15
Manual set+
When the green block is on this item, push the “Enter” key to show as below
Push the “Z/U” key to move the green block, and when the green block is on the “Mode” item, push the
“X+-“ keys to select the anticipant value, “Continue” or “Manual”. When “Continue” item is selected, then
the “Manual” item is not valid, on that time, push the direction keys to move the corresponding axes, and
when the pushed key is loosed, then the corresponding axes will finish moving. When the Mode item is
“manual”, then pushing the direction key one time, the corresponding axes will move a fixed length, unless
the scope is overstepped.
Laser set+
When the green block is on this item, push the “Enter” key to show as below:
Push “Z/U” key to move the green block, and when the green block is on the “Mode” item, push “X+-“ keys
to select the anticipant value, “Continue” or “Manual”. When “Continue” item is selected, then the “Laser
Set” item is not valid, on that time, push the Laser key to splash the enabled lasers, and when Laser key is
loosed, then the lasers will finish splashing. When the Mode item is “manual”, then pushing the Laser key
one time, the enabled lasers will splash a fixed time.
