Cameron NUFLO MC-III Скачать руководство пользователя страница 14

Страница: 14 / 120

Section 1

MC-III™ Panel Mount Flow Analyzer

•

To reset the total with the interface software, double-click the MC-III icon on the computer desktop and

wait for the software to connect to the instrument; then select MC-III Main from the Device Autorun Op

tions screen, and click on the “Reset Flow Total” button in the lower right corner of the Main screen.

•

To reset the total remotely, wire a switch or a pulse-generating device to the remote reset input connector

on the MC-III board. See

Remote Reset Input, page 20

Viewing Daily and Hourly Logs

Each day, as the user-defined contract hour passes, a daily flow total is saved to nonvolatile memory. Hourly

logs are also automatically saved. A total of 384 daily logs and 768 hourly logs are accessible for viewing and

exporting using the interface software. See

Section 5

for details.

Up to 99 daily flow log totals can be viewed from the LCD. Hourly flow log totals are accessible only through

the interface software.

To view daily flow totals from the LCD, perform the following steps:

Press the LEFT ARROW (LOG) key on the keypad. The words “Daily Volume Archive” will scroll across

the bottom of the LCD and the day index will display “01.” The daily flow total recorded at the last con

tract hour will appear at the top of the LCD.

The index number represents the number of days previous to the current date. For example, yesterday’s

totals are read by entering an index of “01”; totals from two days previous are read by entering “02.”

Press UP ARROW (TEST) to increment the index (01, 02, 03...); press LEFT ARROW (LOG) to decre

ment the index (01, 99, 98...).

Press Enter (Save) to exit the Daily Volume Archive menu. (After 2 minutes of inactivity, the Daily Vol

ume Archive menu will time out and the total readout will be restored automatically.)

Saving and Uploading Configuration Files

The MC-III interface software allows users to save an unlimited number of configuration files to their

computer. In the event that a configuration setting gets changed unintentionally or a user simply wants to

restore the settings he used previously, the user can upload the configuration file and resume operation within

minutes. The upload function also allows a configuration file to be loaded quickly into multiple devices. The

default directory for saving configuration files is C:\NuFlo log data\MC-III. However, users can specify a

different location, if desired.
For complete information, see

Saving and Uploading Configuration Files, page 69

Exporting Log Data

Flow logs and event logs can be directly exported to an .xls or .csv file. For complete information, see

Exporting Flow Logs, page 81

, and

Exporting Event Logs, page 84

. The default directory for exported

logs is C:\NuFlo log data\MC-III. However, users can specify a different location, if desired.

Saving Log Data in a Report

Flow logs can be saved in a report format that can be loaded back into the software for viewing or printing

at a later time. For complete information, see

Printing/Saving a Report, page 77

. The default directory for

log reports is

C:\NuFlo log data\MC-III\<WELL NAME>

. However, users can specify a different location, if

desired.

Содержание NUFLO MC-III

























































































































Результаты поиска

Содержание NUFLO MC-III

Отзывы:

Похожие инструкции для NUFLO MC-III

Бренды по названию

Популярные бренды

Cameron NUFLO MC-III, Руководство пользователя

Результаты поиска

Содержание NUFLO MC-III

Отзывы:

Похожие инструкции для NUFLO MC-III

Бренды по названию

Популярные бренды