Cameron NUFLO MC-III Скачать руководство пользователя страница 13

Страница: 13 / 120

MC-III™ Panel Mount Flow Analyzer

Section 1

Event Log Archival

The MC-III Panel Mount saves up to 345 user event logs. Event logs are generated to track user changes such

K-factor changes, input setting changes, power-on reset and “watch-dog” reset, flow cut-off and frequency

cut-off.
By connecting with the interface software, users can download the logs for viewing and/or printing in tabular

format. In addition to showing old and new values, each event log is time-stamped, and includes the register

associated with the change. For more information, see

Section 5

Password-Protected Security

A keypad security access code prevents unauthorized personnel from altering the calibration or accumulated

volume data in the instrument. The security feature may be disabled if this protection is not required.
Password-protected security access is enabled using the interface software. When this feature is enabled,

the user will be prompted for a password when attempting to enter any menu from the keypad. For more

information, see

Security Setup, page 53

Commonly Used Functions

While the functions of the MC-III Panel Mount are too numerous to mention, some of the most commonly

used functions are detailed in this section. They include:

•

reading the rate and accumulated total

•

saving totals to memory

•

resetting the total

•

viewing daily and hourly logs

• saving and uploading configuration files
•

exporting log data to spreadsheet

•

saving log data in a report

Reading Totals

Current totals can be viewed from the LCD on the front of the MC-III Panel Mount or from the interface

software (MC-III Main screen). The software calculates the flow total and updates the LCD display every 4

seconds, by default. The user can adjust the calculation period with the interface software. See

Calculation

Period, page 58

, for more information.

Saving Totals to Memory

Hourly and daily totals are automatically saved to nonvolatile memory. A user may also save an accumulated

total at any time by pressing ENTER (SAVE) on the keypad. In the event of a power failure, the last saved

total will be displayed on the LCD when power is restored.

Important: Always save the accumulated total before replacing batteries.

Resetting the Total

Totals can be reset to zero using the keypad, the interface software, or a pulse from an external device.

• To reset the total with the keypad, press LEFT ARROW (LOG) and ENTER (SAVE) keys simultaneously.

Содержание NUFLO MC-III

























































































































Результаты поиска

Содержание NUFLO MC-III

Отзывы:

Похожие инструкции для NUFLO MC-III

Бренды по названию

Популярные бренды

Cameron NUFLO MC-III, Руководство пользователя

Результаты поиска

Содержание NUFLO MC-III

Отзывы:

Похожие инструкции для NUFLO MC-III

Бренды по названию

Популярные бренды