CAME PXC08, Руководство по программированию

Страница: 9 / 36

Page
9
- Manual:
FA00458-EN
- vers.
1
- 04/2017 - © C
AME S.p.A. - The data and information shown in this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
ENGLISH
KEYPADS
KEYPADS 05
*
▲
ASSOC. AREAS 01
#-
▼
*
▼ ▲
▼ ▲
+ -
SCENARIOS 01
*=MODIFY LIST
SCENARIO A
GOING OUT
*
TAMPER 01
NO
+ -
ENTRY BUZZER 01
YES
+ -
EXIT BUZZER 01
YES
+ -
ALARM BUZZER 01
YES
+ -
DESCRIPTION 01
KEYPAD 01
*
▼ ▲
KEYPAD TYPE 02
LCD
+ -
MODIFY KEYPAD 01
DESCRIPTION 01
Keypad type: (Default:
LCD
)
S A
Menu can be seen for addresses from “02” onwards, lets you choose whether the keypad
is LCD (PXKTB01 or PXKTN01), or LED (PXKIB or PXKIN)
Associated areas: (Default:
#-
)
S A
Associated areas are the areas which can be managed and viewed from the keypad These
also represent an AND-type filter on the areas managed by the code and scenario
Example: there is a flat above a ground-floor shop The owner wants to be able to manage
the flat and the shop using the same code, with the possibility of also being able to manage
the shop from home
Area 1 = HOME
Area 2 = SHOP
Scenario 1 = CLOSE HOME (
SEL.AREAS ON
; areas =
#-
)
Scenario 2 = OPEN HOME (
SEL.AREAS OFF
; areas =
#-
)
Scenario 3 = CLOSE SHOP (
SEL.AREAS ON
; areas =
-#
)
Keypad 1 = Situated in the home: (associated areas =
##
; scenario A =
CLOSE HOME
; scenario B =
OPEN HOME
; scenario C =
CLOSE SHOP
)
Keypad 2 = Situated in the shop: (associated areas =
-#
; scenario A =
CLOSE SHOP
)
Code 1 = Owner (associated areas =
##
)
Code 2 = Employee (associated areas =
-#
)
Scenarios: (Default:
A=sc.1; B=sc.2, C=sc.3, 4=sc.4 ...
)
S A
Associate scenarios with keypad keys
With the arrow keys select the keypad key (A, B, C, 4, 5, etc ) With the
+ –
keys modify the
scenario associated with the keypad key
Example: a home has three areas (living-room, bedroom and perimeter) that you want to
manage via two activations: total, perimeter only
Area 1 = LIVING AREA
Area 2 = BEDROOM AREA
Area 3 = PERIMETER
Scenario 1 = GOING OUT (
EXACT ON+OFF
; areas =
###
)
Scenario 2 = STAYING INDOORS (
EXACT ON+OFF
; areas =
--#
)
Keypad 1 = associated areas =
###
; scenario A =
GOING OUT
;
Scenario B =
STAYING INDOORS
)
Tamper: (Default:
NO
)
S A
Lets you enable/disable the keypad tamper and the warning of no communication with
control unit
Entry buzzer: (Default:
YES
)
S A
Lets you enable/disable the buzzer during entry time
Exit buzzer: (Default:
YES
)
S A
Lets you enable/disable the buzzer during exit time
Alarm buzzer: (Default:
YES
)
S A
Lets you enable/disable the buzzer during control unit alarm time
Keypad description:
S A
Lets you edit the description of the keypad