ENGLISH
Page
27
- Manual:
FA00458-EN
- vers.
1
- 04/2017 - © C
AME S.p.A. - The data and information shown in this manual ar
e t
o be consider
ed as subject t
o change at any time and without the need for any advance warning.
TELEPHONE OPTIONS
TELEPHONE 20
OPTIONS
*
CALL SEQUENCE
CONTINUE 1-2-3-4
▲
▼
▼
▲
▼
▲
+ -
STOP FROM PHONE
EVERYBODY'S
+ -
STOP FROM CODE
NONE
+ -
LINE PRIORITY
PSTN
+ -
SMS RMT-CTRL.
YES
+ -
PSTN RMT-CTRL.
YES
+ -
SKIP ANSWER SERV
NO
+ -
PSTN RINGS No.
[1..15] 05
+ -
Call sequence: (Default:
1-2-3-4
)
S
A
Lets you choose whether, in the selection sequence for programmed telephone numbers, in the
event of communications that are NOT successful (e g the number called is engaged), another
call to the same number is immediately made, or the communicator should continue with the
selection of other telephone numbers
CONTINUE 1-2-3-4
Call and move on to the next number
RETRY 1-1-2-2
Call and try calling back for the number of times set on the phone
Stop call sequence from phone: (Default:
EVERYBODY'S
)
S
A
EVERYBODY'S
If the user presses key 5 on the phone while listening to a voice call,
ALL subsequent telephone communications (SMS, voice, CONTACT-
ID) are interrupted automatically
YOURS ONLY
If the user presses key 5 on the phone while listening to a voice call,
ONLY repetitive call-backs to their own number are interrupted
automatically ALL subsequent telephone communications are still
carried out, however (SMS, voice, CONTACT-ID)
Stop sequence of calls by inserting code / key:
S
A
(Default:
NONE
)
EVERYBODY'S
If an event (general, technical, sabotage, etc alarm) starts the cycle
of telephone calls, it can be interrupted by entering on the keypad a
code/key associated with the areas of competence, that has the
property of disarming areas
NONE
If an event (general, technical, sabotage, etc alarm) starts the cycle
of telephone calls, it CANNOT be interrupted by entering on the
keypad a code/key associated with the areas of competence, that has
the property of disarming areas
Telephone calls priority: (Default:
PSTN
)
F
S
A
The priority lets you select the type of network pre-set, from either the PSTN line or GSM line,
for voice calls If the telephone dialler doesn't find the pre-set network, all the voice calls will be
rerouted onto the secondary network SMS messages are always sent on the GSM line Digital
calls are made only on the PSTN line
PSTN
Voice calls via PSTN phone line
GSM
Voice calls via GSM
Activating remote control by SMS: (Default:
YES
)
A
Lets you activate remote control via SMS
Activating remote control by PSTN (voice guide): (Default:
YES
)
A
Lets you activate access to the voice guide via the PSTN line
Skip answer service: (Default:
NO
)
A
Activated if PSTN RMT-CTRL is set to YES, it lets you access the voice guide even when there
are answer services programmed to answer before the telephone dialler
If set at YES, call the home number and hang up on the first ring; repeat the call within the next
60"
Number of rings from PSTN: (Default:
05
)
A
Activated if PSTN RMT-CTRL is set to YES, it lets you set the number of rings after which the
telephone dialler will answer
Example1: your home doesn't have an answer service and you want the telephone dialler to
answer after 6 rings
Telephone options: Remote control by PSTN
YES
; Skip answer service
NO
; Number of
rings from PSTN:
06
Example 2: your home has an answer service that answers after 5 rings
Telephone options: Remote control by PSTN
YES
; Skip answer service
YES
