Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 765 / 1149

Chapter 16: Unit Management (CLI) Configuring SNMP (CLI)
phn-3965_006v002
Page 16-7
To remove an SNMP v3 user, enter the following command in root view:
root> platform security protocols-control snmp v3-authentication remove
v3-user-name <user-name>
To display all SNMP v3 users and their authentication parameters, enter the following command in root view:
root> platform security protocols-control snmp v3-authentication show
Table 149 SNMPv3 CLI Parameters
Parameter Input Type Permitted Values Description
admin Variable enable
disable Select enable to enable SNMP
monitoring, or disable to disable
SNMP monitoring.
version Variable v1
v2
v3 Select v1, v2, or v3 to specify the
SNMP version.
read-
community Text String Any valid SNMP read
community. The community string for the SNMP
read community.
write-
community Text String Any valid SNMP write
community. The community string for the SNMP
write community.
set-block Variable yes
no yes - SNMPv1 and SNMPv2 access is
blocked.
no - SNMPv1 and SNMPv2 access is
not blocked.
v3-user-name Text String A SNMPv3 user name.
v3-user-
password Text String Must be at least eight
characters. A SNMPv3 user password.
v3-security-
mode Variable authNoPriv
authPriv
noAuthNoPriv Defines the security mode to be used
for this user.
v3-encryption-
mode
Variable
None
DES
AES Defines the encryption (privacy)
protocol to be used for this user.
v3-auth-
algorithm Variable None
SHA
MD5 Defines the authentication algorithm
to be used for this user.
v3-access-
mode Variable readWrite
readOnly Defines the access permission level for
this user.
The following commands enable SNMP v2 on the unit, and set the read community to “public” and the write
community to “private”: