Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 715 / 1149

Chapter 14: Getting Started (CLI) Setting the Time and Date (Optional) (CLI)
phn-3965_006v002
Page 14-20
Parameter Input Type Permitted Values Description
minutes-offset Number 0 – 59 The required minutes relative to GMT. This is
used to offset the clock relative to GMT,
according to the global meridian location.
The following command sets the GMT date and time to January 30, 2014, 3:07 pm and 58 seconds:
root> platform management time-services utc set date-and-time 30-01-
2014,15:07:58
The following command sets the GMT offset to 13 hours and 32 minutes:
root> platform management time-services utc set offset hours-offset 13
minutes-offset 32
To set the daylight savings time parameters, enter the following command in root view:
root> platform management time-services daylight-savings-time set start-
date-month <start-date-month> start-date-day <start-date-day> end-date-
month <end-date-month> end-date-day <end-date-day> offset <offset>
Table 130 Daylight Savings Time CLI Parameters
Parameter Input Type Permitted Values Description
start-date-
month Number 1 - 12 The month when Daylight Savings Time begins.
start-date-day Number 1 - 31 The date in the month when Daylight Savings Time
begins.
end-date-
month Number 1 - 12 The month when Daylight Savings Time ends.
end-date-day Number 1 - 31 The date in the month when Daylight Savings Time
ends.
offset Number 0 - 23 The required offset, in hours, for Daylight Savings
Time. Only positive offset is supported.
The following command configures daylight savings time as starting on May 30 and ending on October 1, with an
offset of 20 hours.
root> platform management time-services daylight-savings-time set start-
date-month 5 start-date-day 30 end-date-month 10 end-date-day 1 offset 20
The following is a sample output of the platform management time-services show status command: