Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 832 / 1149

Chapter 18: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3965_006v002
Page 18-13
SP Type Pipe MNG
SP
Type Attached
Interface Type 802.1q S-Tag 802.1q Q in Q S-Tag
SAP 802.1q No No Yes No No
Bundle-C No No Yes No No
Bundle-S No No No Yes No
All to One No No No No No
Q in Q No No No Yes No
SNP 802.1q No No Yes No No
S-Tag No No No No Yes
Pipe 802.1q Only one
Pipe SP
Allowed No Yes No No
S-Tag No Only one
Pipe SP
Allowed No No Yes
MNG 802.1q Yes No
Only 1 MNG
SP Allowed
No No
Q in Q No No No Only 1 MNG
SP Allowed No
S-Tag No Yes No No Only 1 MNG
SP Allowed
Adding a Service Point (CLI)
The command syntax for adding a service point depends on the interface type of the service point. The interface
type determines which frames enter the service via this service point.
To add a service point with an All-to-One interface type, go to service view for the service and enter the following
command:
service[SID]>sp add sp-type <sp-type> int-type all-to-one spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> sp-name <sp-
name>
To add a service point with a Dot1q interface type, go to service view for the service and enter the following
command:
service[SID]>sp add sp-type <sp-type> int-type dot1q spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> vlan <vlan>
sp-name <sp-name>