Cambium Networks PTP 820 Series Скачать руководство пользователя

Страница: 520 / 1149

Chapter 9: TDM Services and Interfaces

Configuring Native TDM Trails

phn-3965_006v002

Page 9-12

General Guidelines for Provisioning TDM Services

When provisioning TDM trails, it is recommended to follow these guidelines:

•

Each trail within the same local region should use a unique Trail ID. The Trail ID should also be unique along
the path of each trail.

•

For protected trails, the Trail ID of the protecting trail must be different from the Trail ID of the working trail.

•

At one of the two endpoint devices, the

Local

parameter should be set to

while, at the far-end endpoint

device, the

Local

parameter should be set to

Viewing TDM Trails

The Native TDM Services page (

Figure 294

) displays the TDM trails configured on the unit and their basic

parameters.

Table 100

lists and describes the parameters in the Native TDM Services page.

Table 100

Native TDM Service Parameters

Parameter

Definition

Trail ID

A unique ID for the trail.

Trail Description

A text description of the trail.

Interface #1: Slot/Group

Slot 1 or the group number of the first endpoint in the trail.

Interface #1: Port

The port number of the first endpoint in the trail.

Interface #1: VC

The VC classified to the first endpoint of the trail (1-256). This field is only
relevant for radio and cascading endpoints.

Interface #2: Slot/Group

Slot 1 or the group number of the second endpoint in the trail.

Interface #2: Port

The port number of the second endpoint in the trail.

Interface #2: VC

The VC classified to the second endpoint of the trail (1-256). This field is
only relevant for radio and cascading endpoints.

Protecting Interface:
Slot/Group

For protected trails, displays Slot 1 or the group number of the protecting
trail endpoint.

Protecting Interface: Port

For protected trails, the port number of the protecting trail endpoint.

Protecting Interface: VC

For protected trails, the VC classified to the protecting trail endpoint (1-
256). This field is only relevant for radio and cascading endpoints.

Trail Status: Admin

The administrative status of the trail.

Trail Status: Operational

The operational status of the trail.

Содержание PTP 820 Series






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PTP 820 Series

Отзывы:

Похожие инструкции для PTP 820 Series

Бренды по названию

Популярные бренды

Cambium Networks PTP 820 Series, Руководство пользователя

Результаты поиска

Содержание PTP 820 Series

Отзывы:

Похожие инструкции для PTP 820 Series

Бренды по названию

Популярные бренды