Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 428 / 1149

Chapter 7: Quality of Service (QoS) Configuring Policers (Rate Metering)
phn-3965_006v002
Page 7-17
To delete multiple policer profiles:
1. Select the profiles in the Policer Profile table or select all the profiles by selecting the check box in the top row.
2. Click Delete . The profiles are deleted.
Assigning Policers to Interfaces
To assign policers to a logical interface:
1. Select Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page opens ( Figure 214 ).
2. Select the interface in the Ethernet Logical Port Configuration table and click Policers . The Policers page
opens.
Figure 226 Logical Interfaces – Policers Page – Unicast Policer (Default)
For a logical interface, you can assign policers to the following traffic flows:
•
Unicast Policer
•
Multicast Policer
•
Broadcast Policer
•
Ethertype Policers
Assigning Unicast Policers
To assign a policer for unicast traffic to a logical interface:
1. Select Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page opens ( Figure 214 ).
2. Select the interface in the Ethernet Logical Port Configuration Table and click Policers . The Policers page
opens. By default, the Policers page opens to the Unicast Policer table ( Figure 226 ).