Chapter 2: System hardware
System Components
Page 2-21
-48 V DC Power Injector N000000L036A
The DC Power Injector interfaces are shown in
Figure 13
and described in
Table 24
.
Figure 13 -48 V DC Power Injector interfaces
Table 24 -48V DC Power Injector interfaces
Interface
Function
DC input
36 to 60V, 2A
RJ 45 Sockets
Two (Data In and Data & Power Out)
LEDs
Two (AC and Port)
Power supply – PMP/PTP 450 Series
The PMP/PTP 450 Series support powering from the following powering sources:
Gigabit Enet Capable Power Supply – 30 VDC, 15W
CMM4 with external 29 V power supply
Warning
The PMP 450 Ruggedized High Gain Integrated Subscriber Module (Cambium part
numbers C035045C014A and C036045C014A), while encapsulated in a 450i-type
enclosure, contains 450 circuitry which must be powered via 30VDC. Powering these
SMs with a 56 VDC will damage the device.
Содержание PMP 450d Series
