manualshive.com logo in svg

Cambium Networks PMP 450d Series, Руководство пользователя

Серия устройств Cambium Networks PMP 450d обеспечивает высокую пропускную способность и надежное подключение. Пользовательские руководства доступны для бесплатной загрузки на нашем сайте. Настройте ваше оборудование с легкостью, скачав руководство с manualshive.com.

Поделиться
Скачать
background image

Chapter 1:  Product description 

Important regulatory information 

 

 

Page 5 

External antennas 

When using a connectorized version of the product, the conducted transmit power may need to be 
reduced to ensure the regulatory limit on transmitter EIRP is not exceeded. The installer must have 
an understanding of how to compute the effective antenna gain from the actual antenna gain and 
the feeder cable losses. 
The range of permissible values for maximum antenna gain and feeder cable losses are included 
in this user guide together with a sample calculation. The product GUI automatically applies the 
correct conducted power limit to ensure that it is not possible for the installation to exceed the 
EIRP limit, when the appropriate values for antenna gain and feeder cable losses are entered into 
the GUI. 

Avoidance of weather radars (USA only) 

To comply with FCC rules (KDB 443999: Interim Plans to Approve UNII Devices Operating in the 
5470 - 5725 MHz Band with Radar Detection and DFS Capabilities), units which are installed within 
35 km (22 miles) of a Terminal Doppler Weather Radar (TDWR) system (or have a line of sight 
propagation path to such a system) must be configured to avoid any frequency 30 MHz or 
–30 MHz of the frequency of the TDWR device.

 

This requirement applies even if the master is 

outside the 35 km (22 miles) radius but communicates with outdoor clients which may be within 
the 35 km (22 miles) radius of the TDWRs. If interference is not eliminated, a distance limitation 
based on line-of-sight from TDWR will need to be used. Devices with bandwidths greater than 20 
MHz may require greater frequency separation. 
When planning a link in the USA, visit 

http://spectrumbridge.com/udia/home.aspx

, enter the 

location of the planned link and search for TDWR radars. If a TDWR system is located within 35 km 
(22 miles) or has line of sight propagation to the PTP device, perform the following tasks: 

 

Register the installation on 

http://spectrumbridge.com/udia/home.aspx

. 

 

Make a list of channel center frequencies that must be barred, that is, those falling within 
+30 MHz or –30 MHz of the frequency of the TDWR radars. 

The 450 Platform Family AP must be configured to not operate on the affected channels. 

Canada specific information 

 

Caution 

This device complies with ISEDC ’s license-exempt RSSs. Operation is subject to the 
following two conditions: 
(1) This device may not cause interference; and 
(2) This device must accept any interference, including interference that may cause 
undesired operation of the device. 

 
ISEDC requires manufacturers to implement special features to prevent interference to weather 
radar systems that operate in the band 5600 MHz to 5650 MHz. These features must be 
implemented in all products able to operate outdoors in the band 5470 MHz to 5725 MHz. 

Содержание PMP 450d Series
























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PMP 450d Series

Garmin GND 10 Installation Instructions preview
GND 10
Бренд: Garmin Страницы: 2
Paradyne COMSPHERE 3800 Series Release Note preview
COMSPHERE 3800 Series
Бренд: Paradyne Страницы: 88
Paradyne COMSPHERE 3800PLUS Supplementary Manual preview
COMSPHERE 3800PLUS
Бренд: Paradyne Страницы: 5
Paradyne Hotwire 6212 Quick Installation Instructions preview
Hotwire 6212
Бренд: Paradyne Страницы: 2
National Instruments NI-9252 Calibration Procedure preview
NI-9252
Бренд: National Instruments Страницы: 9
STONEFLY DR365V-2404 Setup Manual preview
DR365V-2404
Бренд: STONEFLY Страницы: 48
Google AC-1304 User Manual preview
AC-1304
Бренд: Google Страницы: 14
Gate NanoAAB User Manual preview
NanoAAB
Бренд: Gate Страницы: 8
NETGEAR WAG302 Installation Manual preview
WAG302
Бренд: NETGEAR Страницы: 2
Perle P841 Specifications preview
P841
Бренд: Perle Страницы: 2
TP-Link TD-8816 Quick Installation Manual preview
TD-8816
Бренд: TP-Link Страницы: 2
AirTies Air 4240 User Manual preview
Air 4240
Бренд: AirTies Страницы: 28
HighPoint RocketCache 3240X8 User Manual preview
RocketCache 3240X8
Бренд: HighPoint Страницы: 17
ZALMAN CNPS7000C Series User Manual preview
CNPS7000C Series
Бренд: ZALMAN Страницы: 8
Eurotech Zypad WL15 Series Quick Start preview
Zypad WL15 Series
Бренд: Eurotech Страницы: 2
Advantech PCM-4141 Series User Manual preview
PCM-4141 Series
Бренд: Advantech Страницы: 96
SilverStone GD05 Manual preview
GD05
Бренд: SilverStone Страницы: 28
DFRobot FIT0677 Assembly Manual preview
FIT0677
Бренд: DFRobot Страницы: 30

Бренды по названию

Популярные бренды

Загрузить еще бренды