Chapter 2: System hardware
System Components
Page 2-17
Note
The 900 MHz SM is based off of the 450 Series , please see
Power supply –
PMP/PTP 450
on page
2-21
.
Warning
Always use an appropriately rated and approved AC supply cord-set in
accordance with the regulations of the country of use.
Warning
The PMP 450 Ruggedized High Gain Integrated Subscriber Module (Cambium
part numbers C035045C014A and C036045C014A), while encapsulated in a 450i-
type enclosure, contains 450 circuitry which must be powered via 30
VDC. Powering these SMs with a 56 VDC will damage the device.
Please refer to
Cabling
Ethernet standards and cable
lengths on Page
2-27
for details on maximum cable lengths between
power injector and PMP/PTP 450i.
PSU part numbers
Table 21 PSU part numbers for PMP/PTP 450i Series
Cambium description
Cambium part number
Power supply, 60 W, 56 V with Gbps support
N000065L001B
AC+DC Enhanced Power Injector
C000065L002C
Line Cord, Fig 8 – US
N000065L003A
Line Cord, Fig 8 – UK
N000065L004A
Line Cord, Fig 8 – EU
N000065L005A
Power over Ethernet midspan, 60 W, -48 VDC Input
N000000L036A
Power supply, 30 W, 56 V – Gbps support
N000000L034A
Содержание PMP 450d Series
