Cambium Networks PMP 450d Series, Руководство пользователя

Страница: 202 / 215

Chapter 4: Legal and regulatory information Compliance with radio regulations
Page 4-35
4.9 GHz ETSI EN302 625; V1.1.1 Broadband Disaster Relief
5.4 GHz ETSI EN 301 893 V1.7.1
5.8 GHz ETSI EN 302 502 V1.2.1
Brazil specific information
Brazil notification
For compliant operation in the 5.4 GHz band, the Equivalent Isotropic Radiated Power from the
integrated antenna or connectorized antenna shall not exceed 30 dBm (0.5 W).
The operator is responsible for enabling the DFS feature on any Canopy 5.4 GHz radio by setting
the Country Code to “Brazil”, including after the module is reset to factory defaults.
Important Note: This equipment operates as a secondary application, so it has no rights against
harmful interference, even if generated by similar equipment, and cannot cause harmful
interference on systems operating as primary applications.
Brazil certification numbers
The Anatel certification number for Brazil for the PMP/PTP 450i Series is 2426-15-7745.
Australia Notification
900 MHz modules must be set to transmit and receive only on center channels of 920, 922, or 923
MHz so as to stay within the ACMA approved band of 915 MHz to 928 MHz for the class license and
not interfere with other approved users.
After taking into account antenna gain (in dBi), 900 MHz modules’ transmitter output power (in
dBm) must be set to stay within the legal regulatory limit of 30 dBm (1 W) EIRP for this 900 MHz
frequency band.
Regulatory Requirements for CEPT Member States
(www.cept.org)
When operated in accordance with the instructions for use, Cambium Wireless equipment
operating in the 5.1 GHz and 5.4 GHz bands is compliant with CEPT Resolution 229 (REV. WRC-12).
Operating the 450 Platform Family in the bands 5150 to 5350 MHz and 5470 to 5725 MHz is granted
providing it is not causing interference to the existing primary services allocated to those bands.
For compliant operation in the 5250 to 5350 MHz band, the transmit power from the integrated
antenna or a connectorized antenna shall be limited to a maximum mean EIRP of 200 mW and a
maximum mean EIRP density of 10 mW/MHz in any 1 MHz band.